Bosch PNV9B6F20I complete five-burner hob

Bosch PNV9B6F20I: a spacious five-burner cooking centre

The 90 cm layout gives large cookware room to breathe while five True Brass 2D burners let you boil, fry and simmer together. Total burner output is 13.7 kW.

Power where your cooking needs it

Two 4.0 kW power burners handle fast boiling and high-heat cooking. A 2.3 kW burner supports everyday pans, while two 1.7 kW burners give better control for simmering and smaller cookware.

Bosch PNV9B6F20I burner layout
Bosch PNV9B6F20I brass burner detail

True Brass 2D for responsive flame control

True Brass 2D burners combine strong heat with controllable flame adjustment, helping you move smoothly from rapid heating to gentle cooking.

Stable cookware, cleaner integrated design

Single-piece cast-iron pan supports keep pots and pans steady across the wide black tempered-glass surface. Front-mounted sword knobs keep flame adjustment within easy reach.

Bosch PNV9B6F20I pan supports and controls
Bosch PNV9B6F20I installation information

Auto ignition, safety and professional installation

Knob-integrated electric auto ignition starts the selected burner directly. FFSD protection on all burners adds practical protection if a flame is extinguished.

The hob is factory-set for LPG G30/G31 at 28–30/37 mbar. A compatible natural-gas H/E/(L) nozzle set for 20 (25) mbar is supplied for professional PNG conversion.

PNV family differences at a glance

Feature PNV9B6F10I PNV9B6F20I PNV9B6G20I
Burner technology True Brass 2D True Brass 2D True Brass 3D
Pan supports Matt enamel Single-piece cast iron Single-piece cast iron
Safety distinction Flame-failure safety FFSD on all burners Flame-failure safety
Total burner output 13.7 kW 13.7 kW 13.7 kW

Helpful questions before you buy

Which exact model is shown on this page?
This page is for Bosch PNV9B6F20I, designed for customers who prefer cast-iron stability and FFSD protection.
Can this hob be used with PNG?
Yes, after professional conversion using the compatible natural-gas nozzle set. The technician must adjust the pressure and perform a complete leak test.
Does auto ignition require electricity?
Yes. Plan an appropriate electrical point near the hob for the integrated ignition system.
What must be checked before cutting the worktop?
Confirm the Bosch installation drawing, cut-out size, ventilation, electrical point and LPG/PNG configuration with the authorised installer before cutting.
Free returns within 10 days
Everything Handled by Us
Free returns within 10 days
Everything Handled by Us
Free returns within 10 days
Everything Handled by Us
Free returns within 10 days
Everything Handled by Us
Free returns within 10 days
Everything Handled by Us
Free returns within 10 days
Everything Handled by Us